Filter regulator, G 3/8", 0.5 - 16 bar, 900 l/min, metal without sight glass, drain semi-automatic

In use, the filter regulator cleans the compressed air by centrifugal action and keeps the set secondary pressure constant. It is produced from zinc die casting Z410. The data give port thread G 3/8", overall height 239 mm, dimension H1 100 mm, dimension L 54 mm and flow rate 900 l/min. In addition the data give a metal bowl without a sight glass and condensate drain semi-automatic.

Benefits

• Pressure control range 0.5 - 16 bar at an inlet pressure of 1.5 - 25 bar.
• Flow rate of 900 l/min through the port thread G 3/8".
• Sintered filter with a pore size of 5 µm and an additional centrifugal pre-separation stage.
• Condensate drain semi-automatic in the metal bowl without a sight glass for a condensate volume of up to 35 cm³.
• Relieving pressure regulator with secondary venting that bleeds off automatically at excess secondary pressure, gauge range 0 - 25 bar.

Applications

Upstream of cylinders, valve terminals and tools the regulator supplies a flow of 900 l/min through G 3/8".

Standards and conformity

Without an ignition source of its own in line with Directive 2014/34/EU, inlet pressure 1.5 - 25 bar.