Filter regulator, G 3/4", 0.5 - 10 bar, 12000 l/min, metal without sight glass, drain automatic

Once installed, the filter regulator cleans the compressed air by centrifugal action and keeps the set secondary pressure constant. In addition the sheet lists a flow rate of 12000 l/min. Decisive for the selection is a pressure control range of 0.5 - 10 bar. The version is listed with a metal bowl without a sight glass and condensate drain automatic.

Benefits

• Pressure control range 0.5 - 10 bar at an inlet pressure of 1.5 - 25 bar.
• Flow rate of 12000 l/min through the port thread G 3/4".
• Sintered filter with a pore size of 40 µm and an additional centrifugal pre-separation stage.
• Condensate drain automatic in the metal bowl without a sight glass for a condensate volume of up to 300 cm³.
• Relieving pressure regulator with secondary venting that bleeds off automatically at excess secondary pressure, gauge range 0 - 16 bar.

Technical data

Applications

In the air service unit of a compressed air system the device controls the working pressure in the range 0.5 - 10 bar.

Standards and conformity

Without an ignition source of its own in line with Directive 2014/34/EU, inlet pressure 1.5 - 25 bar.