Filter regulator, G 1", 0.1 - 3 bar, 12000 l/min, plastic, drain automatic

Once installed, the filter regulator cleans the compressed air by centrifugal action and keeps the set secondary pressure constant. This version is listed with port thread G 1", overall height 392 mm, dimension H1 129 mm, dimension L 117 mm and flow rate 12000 l/min. Decisive for the selection is a pressure control range of 0.1 - 3 bar. The version is listed with a plastic bowl and condensate drain automatic.

Benefits

• Pressure control range 0.1 - 3 bar at an inlet pressure of 1.5 - 16 bar.
• Flow rate of 12000 l/min through the port thread G 1".
• Sintered filter with a pore size of 40 µm and an additional centrifugal pre-separation stage.
• Condensate drain automatic in the plastic bowl for a condensate volume of up to 300 cm³.
• Relieving pressure regulator with secondary venting that bleeds off automatically at excess secondary pressure, gauge range 0 - 4 bar.

Technical data

Applications

In the air service unit of a compressed air system the device controls the working pressure in the range 0.1 - 3 bar.

Standards and conformity

Without an ignition source of its own in line with Directive 2014/34/EU, inlet pressure 1.5 - 16 bar.