Pressure regulator, G 2", 0.5 - 20 bar, zinc die casting Z410, inlet pressure max. 40 bar

Within the line the pressure regulator has the task of holding the secondary pressure independently of consumption. The pressure setting range extends over 0.5 - 20 bar. The body is made of zinc die casting Z410. The device is screwed in with G 2". The inlet pressure amounts to at most 40 bar.

Benefits

• Temperature range -10 to +80 °C for use in the workshop and in the plant
• Flow rate 50000 l/min without any appreciable pressure drop in the line
• Height 198 mm and length 160 mm for installation planning
• Pressure setting range 0.5 - 20 bar as the leading rating of the device
• Connection thread G 2" for direct installation in the line
• Inlet pressure at most 40 bar, so the load limit is clearly stated

Technical data

Applications

Plant construction with fluctuating line pressure, packaging machines, conveying technology and maintenance.

Standards and conformity

The data sheets refer to Richtlinie 2014/34/EU. Further approvals are not documented and are therefore not stated.