Pressure regulator, G 1-1/2", 0.5 - 20 bar, zinc die casting Z410, inlet pressure max. 40 bar, 160

This pressure regulator reduces the line pressure to the value the downstream tool actually needs. The material used is zinc die casting Z410. The pressure setting range covers 0.5 - 20 bar. The connection is made via thread G 1-1/2". The inlet pressure amounts to at most 40 bar.

Benefits

• Inlet pressure at most 40 bar, so the load limit is clearly stated
• Temperature range -10 to +80 °C for use in the workshop and in the plant
• Flow rate 50000 l/min without any appreciable pressure drop in the line
• Height 198 mm and length 160 mm for installation planning
• Pressure setting range 0.5 - 20 bar as the leading rating of the device
• Connection thread G 1-1/2" for direct installation in the line

Applications

Assembly lines and manual workstations, pneumatic drives, painting and cleaning technology, laboratory supply.

Standards and conformity

The data sheets refer to Richtlinie 2014/34/EU. Further approvals are not documented and are therefore not stated.