Safety pressure gauge, vertical version, G 1/2", 100 mm, 0 - 25 bar, 1.4301

The safety pressure gauge shows the pressure in a line, vessel or device without auxiliary power. Case and measuring system are made of 1.4301 and 1.4404. The connection is made via G 1/2", the diameter comes to 100 mm. The indicating range extends over 0 - 25 bar. The temperature range extends over -40 to +60 °C.

Benefits

• Degree of protection IP 65 against dust and moisture at the installation point
• Indicating range 0 - 25 bar with a scale division of 0.5 bar
• Connection thread G 1/2" for direct installation in the line
• Nominal size 100 mm for reliable reading from a distance
• Accuracy class 1 as the limit of the permissible measuring deviation
• Temperature range -40 to +60 °C for use in the workshop and in the plant

Applications

Monitoring of pumps and filters, acceptance and repeat tests, setting of regulators and valves.

Standards and conformity

The data sheets refer to EN 837-1, DIN 16006. Further approvals are not documented and are therefore not stated.