Round cylinder, double-acting, Piston Ø 32, Stroke 200, G 1/8 - Riegler 105853

Round cylinder, double-acting, with magnet, Piston Ø 32, Stroke 200, G 1/8, Working pressure max. 10 bar, Temp. -10 °C to 80 °C Version with magnetic piston. Suitable for filtered (50 µm), unlubricated or lubricated compressed air. If lubrication is used, it must be continuous.

Standards and origin

• Customs tariff number: 84123100
• Country of origin: IT

About Round cylinders Ø 32 - 50 mm

Round cylinders convert compressed air into linear motion and handle clamping, pushing and lifting tasks in automation. This group holds 33 double-acting versions with piston diameters of 32 to 50 mm, strokes from 25 to 500 mm and a working pressure up to 10 bar. The round barrel needs no profile grooves and therefore stays slim.

What matters when choosing

• Piston diameter: 32 to 50 mm within this group. Diameter sets the force at a given pressure, and going larger costs air consumption and installation space.
• Stroke: 25 to 500 mm. Match the stroke to the movement actually required, since surplus stroke adds cycle time and loads the piston rod in buckling.
• Connection: G 1/8 or G 1/4. The larger port allows more flow and shorter travel times, but has to suit the valve size and tubing layout.
• Min. set pressure: 0.3 to 0.4 bar depending on version. That figure matters when the cylinder runs on reduced pressure or works as a sensing axis.
• Max. working pressure and sealant: 10 bar with NBR seals. The range is laid out for compressed air filtered to 50 µm, either lubricated or unlubricated.

Typical applications

• Clamping and gripping fixtures in tooling.
• Pushers and diverters in conveying systems, for example to reject workpieces.
• Opening and closing of flaps, gates and shut-off elements.
• Feed movements in assembly and test machines.
• Position sensing with proximity switches on the versions carrying a magnetic piston.

All cylinders are double-acting with NBR seals and suit compressed air filtered to 50 µm. If lubricated air is used, lubrication has to be continuous. Manufacture takes place in Italy.