Hand-held measurement unit for industrial applications - Riegler 135978

Portable hand-held measurement unit for industrial applications with integrated data logger Portable hand-held measurement unit with integrated data logger suitable for flowmeters, for industrial applications such as measurement of consumption and flow, pressure and vacuum, temperature, residual moisture and dew point. With its 3.5 graphical display, measured values can also be displayed on curves in colour. Up to 100 million measured values can be stored and then transmitted to the PC via USB stick. An additional software package also allows data to be conveniently evaluated on the PC, for example for long-term measurements/analyses or simple, quick setup of service reports. - Universal sensor input for many current signals: 0 - 1/10 V, 0/4 - 20 mA, Pt 100, Pt 1000, pulse, Modbus, etc. - Rechargeable lithium ion batteries for > 4 hours control station operation depending on the external sensors - 3.5 transmissive TFT touch panel, graphics, curves, statistics - Integrated data logger - Integrated USB interface - Up to 8 languages available for selection - Graphical and/or tabular reports - Power supply for sensors: Output voltage 24 VDC ± 10%, output current 120 mA in continuous operation - Dimensions: 82 x 96 x 245 mm - Weight: 450 g - Housing material: PC/ABS - Working temperature: 0 °C to +50 °C - Memory space: 4 GB - standard memory card

Standards and origin

• Customs tariff number: 84713000
• Country of origin: DE

About Hand-held measurement unit

The portable hand-held unit reads the connected measuring points and records them with its built-in data logger. Consumption, flow, pressure, vacuum, temperature and dew point can be captured on a running system without installing fixed instrumentation. The group holds four items, the unit itself and its accessories.

What matters when choosing

• Base unit or add-on: the hand-held unit with data logger is the starting point, the connection cable, transport case and software extend it. Anyone adding to an existing set does not need the base unit again.
• Measuring task: consumption and flow, pressure and vacuum, temperature as well as residual humidity and dew point are listed. The task decides which sensor is connected.
• Connection cable: the ready-made cable links the flowmeter to the hand-held unit, cable length approx. 5 m. It is only needed if a flowmeter is to be read as well.
• Evaluation: the PC software presents the readings as tables, graphs and statistics in up to 5 languages, and each package carries 2 licences for different computers. For long term recordings this is the usual route.
• Transport: the case is black polypropylene, 500 x 420 x 225 mm, and weighs approx. 3.5 kg empty. It pays off when the unit travels between sites.

Typical applications

• Recording compressed air consumption of single machines or shop floor sections
• Consumption comparison and leak detection in the compressed air network
• Checking pressure and vacuum on test rigs and fixtures
• Residual humidity and dew point measurement downstream of air dryers
• Long term recording with later evaluation on a PC

All four items in the group are made in Germany, from the hand-held unit and the connection cable through to the case and the software. Readings can also be shown as coloured curves on the graphic display.