Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
Screw-in hose connector, R 2 o., for hose I.D. 50, AF 70
Screw-in hose connector, R 2 o., for hose I.D. 50, AF 70 - Riegler 134224
RIEGLER
Original product
Net price (excl. VAT)
€40.30
Item
RGL-134224
Manufacturer no.
MSN239R250
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.MSN239R250
EAN4047322485234
Country of originChina
Customs tariff number74122000
ConditionNew
Artikel
RGL-134224
Frequently Bought Together
-
This Item:
€40.30
-
Screw-in hose connector - Riegler K1732
As low as €0.70Show details
-
Screw-in hose connector - Riegler K1680
As low as €1.99Show details
Total price
Screw-in hose connector, R 2 o., for hose I.D. 50, nickel-plated brass, Max. working pressure 25 bar, Max. operating temp. 150 °C Suitable for air, water, oil, steam, etc.
Technical data
| Max. working pressure | 25 bar |
|---|---|
| Max. operating temperature | 150 °C |
| Material | nickel-plated brass CW614N (galvanised nickel-plated) |
| Thread | R 2 ET |
| For hose | I.D. 50 mm |
| L1 | 79.0 mm |
| L2 | 25.0 mm |
| a/f | 70 mm |
Standards and origin
- Customs tariff number: 74122000
- Country of origin: CN
About Male hose fittings
A screw-in hose connector puts a threaded port on a soft hose, which slides over the barb and is held by a clamp. It is the simplest joint where no push-in fitting is required and the hose stays permanently installed. Working pressure is 25 to 60 bar depending on the version.
What matters when choosing
- The thread follows the port. Parallel G threads run from G 1/8 to G 1, tapered R threads from R 1/8 to R 3/4, and M5 is available for small ports.
- Barb size follows the inside diameter of the hose and is the second configuration axis next to the thread. It has to match the hose, not the thread size.
- Brass CW614N is the default material. Electroplated nickel-plated brass CW614N suits humidity and visible installation, stainless steel 1.4571 corrosive media.
- Working pressure covers 25 to 60 bar, and part of the range additionally carries a 60 bar operating pressure rating. Allow a margin where pressure surges occur.
- Maximum operating temperature is either 80 °C or 150 °C. For steam and hot oil, only the versions with the higher rating apply.
Typical applications
- Connecting rubber and fabric hoses to manifolds and shut-off valves in the workshop
- Water and coolant lines on machines where the hose stays permanently routed
- Joining compressed air hoses at compressor stations and air preparation units
- Oil and grease lines on lubrication units with a threaded port
- Temporary and permanent lines in plant construction where push-in fittings are too costly or too delicate
Part of the range belongs to the value line series and seals with an NBR O-ring at the thread. The group holds 281 articles in brass, nickel-plated brass and stainless steel 1.4571.
| Hersteller-Nr | MSN239R250 |
|---|---|
| Manufacturer | Riegler |
| Country of Manufacture | China |
| EAN | 4047322485234 |
| Weight | 0.649000 |
| Zolltarifnummer | 74122000 |
| GPSR Herstellerdaten | Riegler & Co. KG, Schützenstraße 27, DE-72574 Bad Urach, www.riegler.de |
| Artikel-Authentizität | Original product |
| Artikelzustand | New |
| Temperature (max.) | 150 |
| Material | Nickel-plated brass CW614N (electroplated nickel finish) |
| Betriebsdruck max [bar] | 25.000000 |
| Pneumatic connection | R2 AG |
| Thread | R 2 AG |
| For hose OD [mm] | LW 50 |
| Working pressure max. [bar] | 25 |
ESD version
-
Screw-in hose connector - Riegler K2466As low as €1.18
Customers Who Bought This Item Also Bought










