Images are examples, some edited with AI. The technical data are authoritative. AI notice
Screw-in hose connector - Riegler K2466
Screw-in hose connector. 41 variants from 1.18 EUR.
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Screw-in hose connector. This range covers 41 variants from 1.18 EUR. Select the version you need above.
Available variants
Shared technical data
| Max. working pressure | 25 bar |
|---|---|
| Max. operating temperature | 150 °C |
| Material | Messing CW614N |
| Customs tariff number | 74122000 |
About Male hose fittings
A screw-in hose connector puts a threaded port on a soft hose, which slides over the barb and is held by a clamp. It is the simplest joint where no push-in fitting is required and the hose stays permanently installed. Working pressure is 25 to 60 bar depending on the version.
What matters when choosing
- The thread follows the port. Parallel G threads run from G 1/8 to G 1, tapered R threads from R 1/8 to R 3/4, and M5 is available for small ports.
- Barb size follows the inside diameter of the hose and is the second configuration axis next to the thread. It has to match the hose, not the thread size.
- Brass CW614N is the default material. Electroplated nickel-plated brass CW614N suits humidity and visible installation, stainless steel 1.4571 corrosive media.
- Working pressure covers 25 to 60 bar, and part of the range additionally carries a 60 bar operating pressure rating. Allow a margin where pressure surges occur.
- Maximum operating temperature is either 80 °C or 150 °C. For steam and hot oil, only the versions with the higher rating apply.
Typical applications
- Connecting rubber and fabric hoses to manifolds and shut-off valves in the workshop
- Water and coolant lines on machines where the hose stays permanently routed
- Joining compressed air hoses at compressor stations and air preparation units
- Oil and grease lines on lubrication units with a threaded port
- Temporary and permanent lines in plant construction where push-in fittings are too costly or too delicate
Part of the range belongs to the value line series and seals with an NBR O-ring at the thread. The group holds 281 articles in brass, nickel-plated brass and stainless steel 1.4571.
Technical data
| Thread | R 1/8 AG, R 1/4 AG, R 3/8 AG, R 1/2 AG, R 3/4 AG, R 1 AG, R 1 1/4 AG, R 1 1/2 AG, R 2 AG |
|---|---|
| For hose OD [mm] | LW 4, LW 6, LW 8, LW 9, LW 10, LW 12, LW 13, LW 16, LW 19, LW 25, LW 32, LW 38, LW 50 |
| Manufacturer | Riegler |
| GPSR Herstellerdaten | Riegler & Co. KG, Schützenstraße 27, DE-72574 Bad Urach, www.riegler.de |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
Downloads
- Datasheet (PDF)
- Data sheet Male hose fittings 117290_MS239R1804-Kundenzeichnung DE
- Data sheet Male hose fittings 117291_MS239R1806-Kundenzeichnung DE
- Data sheet Male hose fittings 117292_MS239R1808-Kundenzeichnung DE
- Data sheet Male hose fittings 117293_MS239R1809-Kundenzeichnung DE
- Data sheet Male hose fittings 117295_MS239R1810-Kundenzeichnung DE
- Data sheet Male hose fittings 117298_MS239R1404-Kundenzeichnung DE
- Data sheet Male hose fittings 117301_MS239R1406-Kundenzeichnung DE
- Data sheet Male hose fittings 117335_MS239R1408-Kundenzeichnung DE
- Data sheet Male hose fittings 117352_MS239R1409-Kundenzeichnung DE
- Data sheet Male hose fittings 117381_MS239R1410-Kundenzeichnung DE
- Data sheet Male hose fittings 117439_MS239R1412-Kundenzeichnung DE
- Data sheet Male hose fittings 117441_MS239R1413-Kundenzeichnung DE
- Data sheet Male hose fittings 117442_MS239R3804-Kundenzeichnung DE
- Data sheet Male hose fittings 117443_MS239R3806-Kundenzeichnung DE
- Data sheet Male hose fittings 117503_MS239R3808-Kundenzeichnung DE
- Data sheet Male hose fittings 117504_MS239R3809-Kundenzeichnung DE
- Data sheet Male hose fittings 117505_MS239R3810-Kundenzeichnung DE
- Data sheet Male hose fittings 117554_MS239R3812-Kundenzeichnung DE
- Data sheet Male hose fittings 117559_MS239R3813-Kundenzeichnung DE
- Data sheet Male hose fittings 117562_MS239R1206-Kundenzeichnung DE
- Data sheet Male hose fittings 117594_MS239R1208-Kundenzeichnung DE
- Data sheet Male hose fittings 117595_MS239R1209-Kundenzeichnung DE
- Data sheet Male hose fittings 117754_MS239R1210-Kundenzeichnung DE
- Data sheet Male hose fittings 117766_MS239R1212-Kundenzeichnung DE
- Data sheet Male hose fittings 117767_MS239R1213-Kundenzeichnung DE
- Data sheet Male hose fittings 117768_MS239R1216-Kundenzeichnung DE
- Data sheet Male hose fittings 117769_MS239R1219-Kundenzeichnung DE
- Data sheet Male hose fittings 117771_MS239R3409-Kundenzeichnung DE
- Data sheet Male hose fittings 117772_MS239R3413-Kundenzeichnung DE
- Data sheet Male hose fittings 117773_MS239R3416-Kundenzeichnung DE
- Data sheet Male hose fittings 117774_MS239R3419-Kundenzeichnung DE
- Data sheet Male hose fittings 117775_MS239R3425-Kundenzeichnung DE
- Data sheet Male hose fittings 117776_MS239R119-Kundenzeichnung DE
- Data sheet Male hose fittings 117777_MS239R125-Kundenzeichnung DE
- Data sheet Male hose fittings 117778_MS239R132-Kundenzeichnung DE
- Data sheet Male hose fittings 117779_MS239R11432-Kundenzeichnung DE
- Data sheet Male hose fittings 117780_MS239R11438-Kundenzeichnung DE
- Data sheet Male hose fittings 117781_MS239R11232-Kundenzeichnung DE
- Data sheet Male hose fittings 117782_MS239R11238-Kundenzeichnung DE
- Data sheet Male hose fittings 117783_MS239R11250-Kundenzeichnung DE
- Data sheet Male hose fittings 117784_MS239R250-Kundenzeichnung DE
ESD version
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day.
