Plug-in angle connector PP, Supports 32 mm, hose exterior Ø 32 - Riegler 110347
-
This Item:
€25.70
-
Thread-reducer, G 3/4, G 1/4 - Riegler 136519
€2.61
-
Bulkhead fitting POM - Riegler K1415
As low as €2.90Show details
Plug-in angle connector PP, Supports 32 mm, for hose exterior Ø 32 mm, Working pressure max. 12 bar Lightweight, push-in fittings distinguished by high strength, toughness, resistance to abrasion and impact resistance - ideal for a wide range of applications. All our push-in fittings made of POM have the following approvals: drinking water DVGW, KTW, FDA and NSF. Plastic and metal tubes are connected together quickly and easily. Suitable for compressed air or liquids, with good resistance to a large number of chemicals.
Technical data
| Series | speedfit |
|---|---|
| Min. working pressure | 0 bar |
| Max. working pressure | 12 bar |
| Min. operating temperature | 0 °C |
| Max. operating temperature | 20 °C |
| Material | polypropylene, glass fibre-reinforced (PP) |
| for tube O.D. | 32 mm |
| L1 | 105.3 mm |
| L2 | 96.0 mm |
| Nozzle | 32 mm |
Standards and origin
- Customs tariff number: 39174000
- Country of origin: GB
About Union elbows
Plug-in elbow connectors turn a plastic line through a right angle and push together without tools. Both ends accept tube, so a corner can be built without bending the line or adding a screwed fitting. The group covers tube outside diameters from 4 to 22 mm, plus one size for 32 mm.
What matters when choosing
- Tube O.D.: 4 to 22 mm on the POM versions. The connector grips the outside of the tube, so wall thickness does not enter the selection.
- Max. working pressure: 10 to 16 bar depending on size. Small nominal sizes carry the higher rating, large ones the lower.
- Min. working pressure: down to -0.95 bar, which covers vacuum sections as well.
- Material: acetal copolymer (POM) for sizes up to 22 mm, glass fibre reinforced polypropylene (PP) for the 32 mm version.
- Series: all parts belong to the speedfit range and combine with its other push-in fittings.
Typical applications
- Drinking water installation and water treatment in plastic pipe
- Cooling and process water lines on machinery
- Compressed air lines in control engineering with tight installation space
- Beverage and food technology, where the fittings hold the relevant approvals
- Test rigs and conversions with frequently rerouted lines
The POM push-in fittings carry drinking water approvals DVGW, KTW, FDA and NSF. Production is in the United Kingdom.
| Hersteller-Nr | 78.3232 |
|---|---|
| Manufacturer | Riegler |
| Country of Manufacture | United Kingdom |
| EAN | 4047322275026 |
| Weight | 0.180000 |
| Zolltarifnummer | 39174000 |
| GPSR Herstellerdaten | Riegler & Co. KG, Schützenstraße 27, DE-72574 Bad Urach, www.riegler.de |
| Artikel-Authentizität | Original product |
| Artikelzustand | New |
| Temperature (max.) | 20 |
| Material | Polypropylene, glass-fibre reinforced (PP) |
| Betriebsdruck max [bar] | 12.000000 |
| Series | speedfit |
| For hose OD [mm] | 32 |
| Working pressure max. [bar] | 12 |










