Test glass, for oil water separator »drukosep« - Riegler 101619

Test glass, for oil water separator »drukosep«

Standards and origin

• Customs tariff number: 84219990
• Country of origin: DE

About Oil-water separators

Compressed air generation always produces condensate, and with oil lubricated compressors that condensate carries oil. Oil water separators collect it and retain the oil fraction in a three stage combination filter so that only the water phase is discharged. The range covers compressor capacities up to 3.5 m³/min and includes the replacement filter sets and the oil test equipment alongside the units themselves.

What matters when choosing

• Max. compressor capacity: 1.5, 2.5 or 3.5 m³/min. What counts is the actual delivered volume of the compressor, not the motor rating. Sizing too tightly noticeably shortens filter service life.
• Vessel and filter element: the vessel is made of PE and PP, the filter pack of PP and activated carbon. Both figures are listed per item and decide how well the unit suits the condensate that occurs.
• Replacement filter set: each of the three sizes has its own set. The filter is a consumable and should be ordered together with the unit, otherwise treatment stops at the first change.
• Test equipment: oil test paper with 50 strips and a test glass belong to this group. They allow the residual oil content of the discharge to be judged on site instead of sending every sample to a laboratory.
• Installation dimensions: height, width, depth and weight are stated per item. The separator needs space below the condensate drains so the condensate can flow in without pressure.

Typical applications

• Condensate treatment on oil lubricated compressors in the compressed air station
• Collecting lines from several condensate drains on filters, dryers and air receivers
• Workshops and maintenance departments that want to avoid disposing of condensate as hazardous waste
• Retrofitting existing compressor rooms where condensate has so far been collected in canisters
• Production areas with several small compressors routed to one common treatment point

All 8 items in this group are made in Germany. Vessel in PE and PP, filter pack in PP and activated carbon.