Test nipple Snap-check with valve, male thread G 1/8", NBR seal - Cejn 103586251

Screwed in at the male thread G 1/8", the nipple serves as a fixed test point of the hydraulic system, the valve closes by itself once the coupling is pulled off.

Advantages

• Male thread G 1/8", the nipple goes into the existing port without an adapter.
• Belongs to the Snap-check test point system from Cejn and therefore fits the couplings and the test hose of the same range.
• Packaging unit 1 piece under manufacturer number 103586251.
• Weight 0.05 kg, so the test point stays light even on moving lines.
• Valve inside the nipple, the test point stays closed while no coupling is attached.
• Sealing material NBR, as stated in the article designation.
• Pipe thread G (BSP) in size 1/8" according to the manufacturer data.

Applications

The part is used in hydraulic maintenance, during commissioning of power units and for checking pressure lines in mechanical engineering.