Pressure regulator, G 1-1/4", 0.2 - 6 bar, aluminium, inlet pressure max. 40 bar

Within the line the pressure regulator has the task of holding the secondary pressure independently of consumption. The pressure setting range covers 0.2 - 6 bar. The connection is made via thread G 1-1/4". The material used is aluminium. The inlet pressure amounts to at most 40 bar.

Benefits

• Pressure setting range 0.2 - 6 bar as the leading rating of the device
• Connection thread G 1-1/4" for direct installation in the line
• Inlet pressure at most 40 bar, so the load limit is clearly stated
• Temperature range -10 to +60 °C for use in the workshop and in the plant
• Flow rate 31500 l/min without any appreciable pressure drop in the line
• Height 190 mm and length 119 mm for installation planning

Applications

Assembly lines and manual workstations, pneumatic drives, painting and cleaning technology, laboratory supply.

Standards and conformity

The data sheets refer to Richtlinie 2014/34/EU. Further approvals are not documented and are therefore not stated.