Pressure regulator, G 1-1/2", 0.1 - 3 bar, aluminium, inlet pressure max. 40 bar

Within the line the pressure regulator has the task of holding the secondary pressure independently of consumption. The body is made of aluminium. The device is screwed in with G 1-1/2". The pressure setting range extends over 0.1 - 3 bar. The inlet pressure amounts to at most 40 bar.

Benefits

• Height 190 mm and length 119 mm for installation planning
• Pressure setting range 0.1 - 3 bar as the leading rating of the device
• Connection thread G 1-1/2" for direct installation in the line
• Inlet pressure at most 40 bar, so the load limit is clearly stated
• Temperature range -10 to +60 °C for use in the workshop and in the plant
• Flow rate 31500 l/min without any appreciable pressure drop in the line

Applications

Compressed air supply of machines, tools and clamping fixtures, test benches as well as control systems.

Standards and conformity

The data sheets refer to Richtlinie 2014/34/EU. Further approvals are not documented and are therefore not stated.