Mist lubricator, G 1/2", 0 - 16 bar, zinc die casting Z410, plastic bowl with protective cage

The mist lubricator adds a fine quantity of oil to the compressed air and thus lubricates cylinders and air tools. The body is made of zinc die casting Z410. The device is screwed in with G 1/2". The inlet pressure extends over 0 - 16 bar. The temperature range extends over -10 to +60 °C.

Benefits

• Height 198 mm and length 69 mm for installation planning
• Inlet pressure 0 - 16 bar as the leading rating of the device
• Connection thread G 1/2" for direct installation in the line
• Temperature range -10 to +60 °C for use in the workshop and in the plant
• Flow rate 60 - 4700 l/min without any appreciable pressure drop in the line
• Oil reservoir 125 cm³ for long refilling intervals

Technical data

Applications

Assembly lines with continuously running cylinders, conveying technology, workshop supply and maintenance.

Standards and conformity

The data sheets refer to Richtlinie 2014/34/EU. Further approvals are not documented and are therefore not stated.