Series 1 filter regulator, G 1/4", 0.5-16 bar, bowl with guard, automatic drain

As a filter regulator the article cleans the compressed air by centrifugal action and then holds the working pressure steady. The data state a pressure control range of 0.5 - 16 bar. This version is listed with port thread G 1/4". Material zinc die casting Z410 is listed for this version. Also stated are filter regulator, plastic bowl with protective cage and a condensate drain that is automatic.

Benefits

• Pressure control range 0.5 - 16 bar at an inlet pressure of 1.5 - 16 bar.
• Port thread G 1/4" at a flow of 1600 l/min in series 1.
• Gauge range 0 - 25 bar through the G 1/4" gauge port.
• Pore size in the sintered filter 5 µm, the attainable air quality to ISO 8573-1 is 6:4:4.
• The regulator is relieving and vents the secondary side by itself when the pressure rises.
• Temperature range -10 to +60 °C for compressed air and neutral gases.

Applications

In a workshop installation the gauge shows the set working pressure over 0 - 25 bar.