Filter regulator, G 1/4", 0.2 - 6 bar, zinc die casting Z410, plastic bowl, halbautomatisch

Upstream of tools and valves the filter regulator handles separation and pressure setting at the same time. The pressure setting range extends over 0.2 - 6 bar. The body is made of zinc die casting Z410. The device is screwed in with G 1/4". The inlet pressure amounts to 1.5 - 16 bar.

Benefits

• Temperature range -10 to +60 °C for use in the workshop and in the plant
• Version according to ISO 8573-1
• Material zinc die casting Z410 determines strength and resistance of the part
• Pressure setting range 0.2 - 6 bar as the leading rating of the device
• Connection thread G 1/4" for direct installation in the line
• Inlet pressure 1.5 - 16 bar, so the load limit is clearly stated

Technical data

Applications

Plants with long pipe runs, manual workstations, feeding technology and maintenance.

Standards and conformity

The data sheets refer to ISO 8573-1. Further approvals are not documented and are therefore not stated.