Series 1 lockable filter regulator, G 3/8", 0.2-6 bar, plastic bowl, semi-automatic drain

Once installed, the filter regulator cleans the compressed air by centrifugal action and then holds the working pressure steady. In addition the sheet lists a gauge range of 0 - 10 bar. This version comes with port thread G 3/8". The version is listed with lockable filter regulator, plastic bowl and a condensate drain that is semi-automatic.

Benefits

• Pressure control range 0.2 - 6 bar at an inlet pressure of 1.5 - 16 bar.
• Port thread G 3/8" at a flow of 1600 l/min in series 1.
• Gauge range 0 - 10 bar through the G 1/4" gauge port.
• Pore size in the sintered filter 5 µm, the attainable air quality to ISO 8573-1 is 6:4:4.
• The regulator is relieving and vents the secondary side by itself when the pressure rises.
• Temperature range -10 to +60 °C for compressed air and neutral gases.

Applications

In a workshop installation the gauge shows the set working pressure over 0 - 10 bar.