Pressure regulator, G 3/8", 0.2 - 6 bar, zinc die casting Z410, series 1, flow rate 2250 l/min

Within the line the pressure regulator has the task of holding the secondary pressure independently of consumption. The connection is made via thread G 3/8". The material used is zinc die casting Z410. The pressure setting range covers 0.2 - 6 bar. The temperature range extends over -10 to +60 °C.

Benefits

• Height 94 mm and length 48 mm for installation planning
• Version according to Richtlinie 2014/34/EU
• Pressure setting range 0.2 - 6 bar as the leading rating of the device
• Connection thread G 3/8" for direct installation in the line
• Temperature range -10 to +60 °C for use in the workshop and in the plant
• Flow rate 2250 l/min without any appreciable pressure drop in the line

Applications

Compressed air supply of machines, tools and clamping fixtures, test benches as well as control systems.

Standards and conformity

The data sheets refer to Richtlinie 2014/34/EU. Further approvals are not documented and are therefore not stated.