Pressure gauge, vertical, 63 mm, range 0 - 250 bar, G 1/4", sheet steel case, class 1.6

Once installed, the pressure gauge indicates the working pressure at the measuring point without auxiliary power. It is produced from sheet steel. The data give a case diameter of 63 mm. In addition the data give the G 1/4" connection thread and the version with sheet steel case, class 1,6.

Benefits

• Indicating range 0 - 250 bar with a scale division of 10 bar.
• Case diameter 63 mm for a scale that stays readable from a distance.
• Connection thread G 1/4" at the bottom of the case, read in the vertical position.
• Two scales on the dial, bar on the outside and psi on the inside.
• Protection IP 42 over a temperature range of -20 to +60 °C.
• Supplied as sheet steel case, class 1.6 according to the data sheet.

Applications

On compressed air lines and pumps the instrument with its 63 mm case shows the range 0 - 250 bar.

Standards and conformity

The data give protection IP 42, a temperature range of -20 to +60 °C and a dial with scales in bar and psi.