Corner safety valve, for compressed air and non-flammable gases, G 3/4", DN 13, 1.6 bar, gunmetal
Every compressed air receiver has to be protected against inadmissible overpressure. This corner safety valve opens at 1.6 bar and blows off 70 m³/h without any control system taking action. The connection is G 3/4" and the nominal size DN 13. A gunmetal body and a seal of FKM allow temperatures of -20 to +200 °C. The height above the connecting face is 70 mm.
Advantages
- Discharge capacity of 70 m³/h of compressed air at DN 13, sufficient for the matching receiver or compressor.
- Fixed set pressure of 1.6 bar, so the protection is unambiguous without any adjustment on site.
- Gunmetal body, spring steel spring and a seal of FKM, matched to compressed air and other non-toxic, non-flammable gases.
- Temperature range of -20 to +200 °C, which covers outdoor installation and hot media alike.
- Corner design with 31 mm face-to-centre length and 70 mm overall height, so the valve adds little to a vessel wall.
Technical data
| Feature | Value |
|---|---|
| Version | for compressed air and other non-toxic, non-flammable gases |
| Connection thread | G 3/4" |
| Nominal size DN [mm] | 13 |
| Set pressure [bar] | 1.6 |
| Discharge capacity compressed air [m³/h] | 70 |
| Temperature range [°C] | -20 to +200 |
| Width across flats [mm] | 32 |
| Face-to-centre length L [mm] | 31 |
| Height h [mm] | 18 |
| Overall height H [mm] | 70 |
| Component identification | TÜV-SV...-312.13.D/G.0,28 CE0036 1,6 bar |
| Body material | gunmetal |
| Spring material | spring steel |
| Seal material | FKM |
| Media | compressed air and other non-toxic, non-flammable gases |
| Setting | fixed setting, type tested |
Applications
Pressure vessels in plant engineering with nominal size DN 13. Protection of headers with a discharge capacity of 70 m³/h. Test rigs and experimental setups limited to 1.6 bar. Installation in tight spaces where the corner design with 31 mm face-to-centre length saves room.
Standards and conformity
The valve is type tested and carries the component identification TÜV-SV...-312.13.D/G.0,28 CE0036 1,6 bar. It is supplied with a fixed setting only, so the set pressure of 1.6 bar cannot be altered. A setting certificate to 3.1 is available on request.
| Weight | 0.270000 |
|---|---|
| Manufacturer | Fluidics equipment |
| Hersteller-Nr | SVGI 34 13-1,6 |
| EAN | 4050571678388 |
| Zolltarifnummer | 84814010 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Ausführung | für Druckluft und andere ungiftige, nicht brennbare Gase |
| Thread | G 3/4 |
| Set pressure [bar] | 1,6 |
| Temperaturbereich | -20-200 °C |
