Corner safety valve, for compressed air and non-flammable gases, G 1-1/4", DN 18, 7.5 bar, gunmetal
Compressor stations and compressed air networks are protected by a safety valve that works purely mechanically. This version in G 1-1/4" responds at 7.5 bar and discharges 448 m³/h. The nominal size DN 18 determines the discharge cross section. The spring steel spring and the FKM seal withstand the range -20 to +200 °C. The hexagon offers 49 mm across flats.
Advantages
- Connection G 1-1/4" with nominal size DN 18 and 49 mm across flats, so an ordinary spanner is enough for installation.
- Discharge capacity of 448 m³/h of compressed air at DN 18, sufficient for the matching receiver or compressor.
- Fixed set pressure of 7.5 bar, so the protection is unambiguous without any adjustment on site.
- Temperature range of -20 to +200 °C, which covers outdoor installation and hot media alike.
- Gunmetal body, spring steel spring and a seal of FKM, matched to compressed air and other non-toxic, non-flammable gases.
Technical data
| Feature | Value |
|---|---|
| Version | for compressed air and other non-toxic, non-flammable gases |
| Connection thread | G 1-1/4" |
| Nominal size DN [mm] | 18 |
| Set pressure [bar] | 7.5 |
| Discharge capacity compressed air [m³/h] | 448 |
| Temperature range [°C] | -20 to +200 |
| Width across flats [mm] | 49 |
| Face-to-centre length L [mm] | 40 |
| Height h [mm] | 25 |
| Overall height H [mm] | 100 |
| Component identification | TÜV-SV...-312.18.D/G.0,28 CE0036 7,5 bar |
| Body material | gunmetal |
| Spring material | spring steel |
| Seal material | FKM |
| Media | compressed air and other non-toxic, non-flammable gases |
| Setting | fixed setting, type tested |
Applications
Stationary compressed air systems with a fixed set pressure of 7.5 bar. Vessels and pipework with female thread G 1-1/4". Plants with operating temperatures within the range -20 to +200 °C. Replacement of a defective safety valve of the same nominal size DN 18.
Standards and conformity
The valve is type tested and carries the component identification TÜV-SV...-312.18.D/G.0,28 CE0036 7,5 bar. It is supplied with a fixed setting only, so the set pressure of 7.5 bar cannot be altered. A setting certificate to 3.1 is available on request.
| Hersteller-Nr | SVGI 114 18-7,5 |
|---|---|
| Manufacturer | Fluidics equipment |
| EAN | 4050571676995 |
| Zolltarifnummer | 84814010 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikel-Authentizität | Original product |
| Artikelzustand | New |
| Temperaturbereich | -20-200 °C |
| Ausführung | für Druckluft und andere ungiftige, nicht brennbare Gase |
| Thread | G 1 1/4 |
| Set pressure [bar] | 7,5 |
