Corner safety valve, for saturated steam and compressed air, G 1", DN 16, 10.0 bar, gunmetal
In steam and compressed air systems the safety valve is the last element of pressure protection and has to work without auxiliary power. This corner valve in G 1" responds at 10.0 bar and is fixed to that setting. Through DN 16 it discharges 460 m³/h of compressed air. The EPDM seal and the gunmetal body permit temperatures of -40 to +150 °C. The width across flats at the hexagon is 40 mm.
Advantages
- Connection G 1" with nominal size DN 16 and 40 mm across flats, so an ordinary spanner is enough for installation.
- Discharge capacity of 460 m³/h of compressed air at DN 16, sufficient for the matching receiver or compressor.
- Fixed set pressure of 10.0 bar, so the protection is unambiguous without any adjustment on site.
- Temperature range of -40 to +150 °C, which covers outdoor installation and hot media alike.
- Gunmetal body, spring steel spring and a seal of EPDM, matched to steam, compressed air and other non-toxic, non-flammable gases.
Technical data
| Feature | Value |
|---|---|
| Version | for saturated steam and steam boilers to TRD group 1 and for compressed air |
| Connection thread | G 1" |
| Nominal size DN [mm] | 16 |
| Set pressure [bar] | 10.0 |
| Discharge capacity compressed air [m³/h] | 460 |
| Temperature range [°C] | -40 to +150 |
| Width across flats [mm] | 40 |
| Face-to-centre length L [mm] | 35 |
| Height h [mm] | 22 |
| Overall height H [mm] | 80 |
| Component identification | TÜV-SV...-312.16.D/G.0,28 CE0036 10 bar |
| Body material | gunmetal |
| Spring material | spring steel |
| Seal material | EPDM |
| Media | steam, compressed air and other non-toxic, non-flammable gases |
| Setting | fixed setting, type tested |
Applications
Stationary compressed air systems with a fixed set pressure of 10.0 bar. Vessels and pipework with female thread G 1". Plants with operating temperatures within the range -40 to +150 °C. Replacement of a defective safety valve of the same nominal size DN 16.
Standards and conformity
The valve is type tested and carries the component identification TÜV-SV...-312.16.D/G.0,28 CE0036 10 bar. It is supplied with a fixed setting only, so the set pressure of 10.0 bar cannot be altered. A setting certificate to 3.1 is available on request. The version is approved for saturated steam and for steam boilers to TRD group 1.
| Hersteller-Nr | SVGI 10 16-10 EP |
|---|---|
| Manufacturer | Fluidics equipment |
| EAN | 4050571675424 |
| Weight | 0.480000 |
| Zolltarifnummer | 84814010 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikel-Authentizität | Original product |
| Artikelzustand | New |
| Temperaturbereich | -40-150 °C |
| Ausführung | für Sattdampf / Dampfkessel nach TRD Gruppe 1 und Druckluft |
| Thread | G 1 |
| Set pressure [bar] | 10,0 |
