Safety valve, type-approved, preset and sealed, G 3/8", DN 10, 6.00 bar, nickel-plated brass

As soon as the system pressure rises to 6.00 bar, the valve lifts automatically and releases up to 281.5 m³/h to the atmosphere. The setting is fixed and lead-sealed at the factory and cannot be altered during operation. With its G 3/8" thread, DN 10 nominal size and a body of nickel-plated brass, the valve fits common manifolds and vessel ports.

Benefits

• Free-blowing design without collecting line, the 281.5 m³/h are released directly to the atmosphere.
• Self-acting operation without auxiliary power, the valve recloses once the pressure has fallen below 6.00 bar.
• Fixed setting at 6.00 bar and lead-sealed, so the set pressure is protected against unauthorised adjustment.
• Tested discharge capacity of 281.5 m³/h, referred to the set pressure of 6.00 bar.
• Connection thread G 3/8" at nominal size DN 10, installation with 27 mm across flats.

Technical data

Applications

• Installations with requirements on the resistance of the material nickel-plated brass.
• Retrofitting on existing DN 10 vessel ports.
• Protection of compressed air receivers with a permissible operating pressure of 6.00 bar.

Standards and conformity

The valve is type-tested and carries the component marking TÜV.SV...-882.10.D/G.0.71 CE0036 6 bar. Only the factory set and lead-sealed version is supplied, the set value of this article is 6.00 bar. Fixed settings between 0.2 and 50 bar are available from the manufacturer. A test certificate for the setting and a version with NPT thread are available as options.