Safety valve, type-approved, preset and sealed, G 3/8", DN 10, 3.10 bar, brass

For vessels and lines that must stay below their permissible operating pressure at all times, this valve works with a fixed set pressure of 3.10 bar. The corresponding discharge capacity is 141.5 m³/h. The connection is a G 3/8" thread in DN 10 and the body is made of brass.

Benefits

• Body material brass, approved for compressed air and other non-toxic, non-flammable gases.
• Type-tested design carrying the component marking TÜV.SV...-882.10.D/G.0.61 CE0036 3,1 bar.
• Free-blowing design without collecting line, the 141.5 m³/h are released directly to the atmosphere.
• Self-acting operation without auxiliary power, the valve recloses once the pressure has fallen below 3.10 bar.
• Fixed setting at 3.10 bar and lead-sealed, so the set pressure is protected against unauthorised adjustment.

Technical data

Applications

• Test benches and machines whose system pressure has to be limited to a fixed value.
• Control air circuits that are protected against pressure peaks.
• Manifolds and receivers with a G 3/8" connection.
• Installations with requirements on the resistance of the material brass.

Standards and conformity

The valve is type-tested and carries the component marking TÜV.SV...-882.10.D/G.0.61 CE0036 3.1 bar. Only the factory set and lead-sealed version is supplied, the set value of this article is 3.10 bar. Fixed settings between 0.2 and 50 bar are available from the manufacturer. A test certificate for the setting and a version with NPT thread are available as options.