Safety valve, preset and lead-sealed, G 3/8", DN 10, 11.00 bar, stainless steel 1.4571

Wherever a compressed air receiver or a pipe has to be protected against overpressure, this spring-loaded valve does the job without auxiliary power. It responds at 11.00 bar and discharges up to 485.8 m³/h. The connection is the G 3/8" thread in nominal size DN 10, and the body is made of stainless steel 1.4571.

Benefits

• Screwed in through G 3/8" in DN 10 and tightened at the 27 mm wrench flat.
• Type approval documented by the marking TÜV.SV...-882.10.D/G.0.71 CE0036 11 bar.
• Overall height H of 95 mm and height h of 12 mm, so the space required is known before installation.
• The set value of 11.00 bar stays traceable and unchanged thanks to the lead seal.
• Discharge capacity of 485.8 m³/h, referred to the set pressure of 11.00 bar.

Technical data

Applications

• Protection of compressed air receivers with a permissible working pressure of 11.00 bar.
• Protection of pipes and fittings in compressed air networks with a G 3/8" connection.
• Use on compressors and air treatment units where up to 485.8 m³/h have to be discharged.

Standards and conformity

The component identification TÜV.SV...-882.10.D/G.0.71 CE0036 11 bar proves the type approval and states the notified body CE0036 together with the set pressure. Valves of this series are delivered with fixed settings between 0.2 and 50 bar, here at 11.00 bar. An NPT thread and a setting certificate are available as options.