Safety valve, type-approved, preset and sealed, G 3/4", DN 10, 10.60 bar, brass

This safety valve limits the pressure in compressed air systems and opens automatically as soon as 10.60 bar is reached. When it responds, up to 470.2 m³/h are discharged freely until the system pressure drops below the set value again. The valve body is made of brass and is screwed in via the G 3/4" thread in nominal size DN 10.

Benefits

• FKM seal, which covers a temperature range from -25 to +180 °C.
• Overall height 95 mm and screw-in section height 16 mm, so the space required can be determined before installation.
• Body material brass, approved for compressed air and other non-toxic, non-flammable gases.
• Type-tested design carrying the component marking TÜV.SV...-882.10.D/G.0.71 CE0036 10,6 bar.

Technical data

Applications

• Supply lines for non-toxic and non-flammable gases.
• Test benches and machines whose system pressure has to be limited to a fixed value.
• Control air circuits that are protected against pressure peaks.

Standards and conformity

The valve is type-tested and carries the component marking TÜV.SV...-882.10.D/G.0.71 CE0036 10.6 bar. Only the factory set and lead-sealed version is supplied, the set value of this article is 10.60 bar. Fixed settings between 0.2 and 50 bar are available from the manufacturer. A test certificate for the setting and a version with NPT thread are available as options.