Safety valve, preset and lead-sealed, G 1/2", DN 10, 7.00 bar, nickel-plated brass

The set pressure is factory adjusted to 7.00 bar and lead-sealed, so the value cannot be changed unnoticed. When the system reaches this pressure, the valve discharges up to 322.4 m³/h. The nickel-plated brass body carries the G 1/2" connection thread for nominal size DN 10.

Benefits

• Type-approved and marked with the component identification TÜV.SV...-882.10.D/G.0.71 CE0036 7 bar.
• With H at 75 mm and h at 14 mm the installation space stays manageable.
• Factory set to 7.00 bar and lead-sealed, so the set pressure is protected against unauthorised adjustment.
• At 7.00 bar the valve releases 322.4 m³/h, a figure that applies to free discharge into the surrounding air.
• The G 1/2" thread and nominal size DN 10 suit common compressed air manifolds, spanner size 27 mm.

Technical data

Applications

• Use on compressors and air treatment units where up to 322.4 m³/h have to be discharged.
• Protection of gas lines carrying non-toxic, non-flammable gases up to 7.00 bar.
• Installation in systems with operating temperatures between -25 and +180 °C.

Standards and conformity

The valve is type-approved and carries the component identification TÜV.SV...-882.10.D/G.0.71 CE0036 7 bar. The marking states the notified body CE0036 and the set pressure. Delivery is exclusively with a fixed setting, fixed values between 0.2 and 50 bar are possible. A setting certificate and an NPT thread are available as options.