Filter regulator, G 3/4", 0.1 - 2 bar, plastic bowl, automatic drain

Once installed, the filter regulator cleans the compressed air by centrifugal action with a downstream sintered filter and keeps the set working pressure constant. The data also state an inlet pressure of 1.5 - 16 bar. Decisive for the selection is a pressure control range of 0.1 - 2 bar. In addition the data give version filter regulator, plastic bowl and condensate drain automatic.

Benefits

• Pressure control range 0.1 - 2 bar at an inlet pressure of 1.5 - 16 bar.
• Gauge range 0 - 2.5 bar, so the set pressure can be read without an additional instrument.
• Port G 3/4" at a flow rate of 13000 l/min.
• Filtration by centrifugal action with a sintered filter of 5 µm pore size, the air quality reached to ISO 8573-1 is [6:4:4].
• Condensate drain automatic and plastic bowl with protective cage.
• The regulator is relieving, it vents by itself if the secondary side is over-pressurised.

Technical data

Applications

Upstream of a tool or cylinder the filter regulator keeps the pressure in the 0.1 - 2 bar range constant even when the line pressure varies.

Standards and conformity

Compressed air and neutral gases are approved in the temperature range -10 to +50 °C.