Adjustable straight fitting, sealing cone, pipe ext. Ø 6 mm, FKM - Riegler 112332

Adjustable straight fitting, sealing cone, nut M12x1.5 i., pipe exterior Ø 6 mm, PN max. 315 bar, stainless steel 1.4571, FKM Version with parallel thread and FKM seal. Suitable for compressed air, liquids, natural gas and hydraulics. Not suitable for nitrogen, oxygen, helium, hydrogen or welding gases!

Standards and origin

• Customs tariff number: 73072910
• Country of origin: DE

About Union

Straight screw-in fittings connect a tube to a threaded port on the component and carry the full system pressure. The series covers tube outside diameters from 6 to 28 mm, with nominal pressure ratings from PN 160 to PN 630.

What matters when choosing

• Tube outside diameter, 6 to 28 mm, has to be matched exactly, because the cutting ring and the nut are made for that one diameter.
• The screw-in thread is either BSP from G 1/8 male to G 1 male or metric from M12x1.5 male to M33x2.0 male. It follows the port on the valve block, cylinder or power unit.
• Nominal pressure runs from 160 to 630 bar and differs by size. What counts is the highest pressure occurring in the circuit, not the nominal working pressure.
• Materials are galvanised steel and stainless steel 1.4571, both to DIN 2353. Stainless is used in corrosive surroundings or with aggressive media.
• Part of the series carries an FKM seal. Those versions seal on the sealing cone rather than through the thread alone.

Typical applications

• Tube runs on hydraulic power units and valve blocks
• Connecting hydraulic cylinders on presses and machine tools
• Piping control blocks in special purpose machinery
• Lubrication and oil lines at high pressure levels
• Hydraulic test rigs and measuring sections

Both materials, galvanised steel and stainless steel 1.4571, are made to DIN 2353. 14 of the 96 items additionally carry an FKM seal.