Push-in cartridge »Blue Series«, for hose exterior Ø 4 mm - Riegler 109942
-
This Item:
€0.56
-
Push-in Y-connector - Riegler K1249
As low as €4.80Show details
-
Push-in Y-connector, Plug nipple 12 mm »Blue Series«, reducing - Riegler 125737
€5.63
Push-in cartridge »Blue Series«, can only be pressed in plastic, for hose exterior Ø 4 mm, pmax short term 15 bar Push-in fittings series manufactured in plastic and nickel-plated brass. All parts are suitable for use with hoses, tubes or pipes made of plastic. Only recommended for use in combination with quick connectors of the Blue Series. Suitability testing for use with other series is the responsibility of the user.
Technical data
| Series | Blue series |
|---|---|
| Max. working pressure short term | 15 bar |
| Min. working pressure | -0.95 bar |
| Max. working pressure | 10 bar |
| Max. temperature range | 80 °C |
| Min. temperature range | -20 °C |
| Material | plastic and zinc |
| Sealant | NBR |
| Medium | compressed air |
| Recommended hose | PU, PA (nylon) |
| Applications | compressed air systems, automotive,packaging industry,vacuum |
| Sleeve | plastic |
| for tube O.D. | 4 mm |
| L1 | 11.3 mm |
Standards and origin
- Customs tariff number: 39174000
- Country of origin: CN
About Press-in sleeves
A push-in cartridge is pressed into a prepared bore in a plastic part and turns it into a push-in port, with no thread to cut and no fitting to install. That saves space on housings, manifolds and valve carriers. Tube outside diameters from 4 to 12 mm are accepted at a working pressure up to 10 bar.
What matters when choosing
- For tube O.D.: 4, 6, 8, 10 and 12 mm. The port grips the outside diameter of the tube, wall thickness does not matter here.
- Working pressure: -0.95 to 10 bar, with 15 bar stated for short periods. The vacuum figure covers suction applications as well.
- Mounting bore: according to the product text the cartridges can only be pressed into plastic. Metal housings call for a screwed fitting instead.
- Material and seal: plastic or zinc with an NBR seal, compressed air is the medium given. The range is not rated for liquids.
- Series: use is recommended only together with quick connectors of the Blue series, so that tube, release ring and collet match.
Typical applications
- Push-in ports directly in the plastic housing of manifolds and valve carriers
- Compact assemblies with no room for a screwed fitting
- Series parts where the port is pressed in during assembly
- Vacuum applications down to -0.95 bar
- Adding an extra outlet to an existing plastic part
The 5 items are made of plastic or zinc and sealed with NBR, supplied from China. The manufacturer recommends combining them only with quick connectors of the Blue series.
| Weight | 0.001000 |
|---|---|
| Manufacturer | Riegler |
| Hersteller-Nr | 224.04 |
| EAN | 4047322592680 |
| Zolltarifnummer | 39174000 |
| GPSR Herstellerdaten | Riegler & Co. KG, Schützenstraße 27, DE-72574 Bad Urach, www.riegler.de |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Country of Manufacture | China |
| Material | Plastic or zinc |
| For hose OD [mm] | 4 |
| Seal material | NBR |
| Working pressure max. [bar] | 10 |
| Medium | Compressed air |
| Series | Blaue Serie |
| Betriebsdruck max [bar] | 10.000000 |










