Pressure regulator, G 1-1/2", 0.2 - 6 bar, zinc die casting Z410, series 7

This pressure regulator reduces the line pressure to the value the downstream tool actually needs. The material used is zinc die casting Z410. The pressure setting range covers 0.2 - 6 bar. The connection is made via thread G 1-1/2". The temperature range extends over -10 to +60 °C.

Benefits

• Temperature range -10 to +60 °C for use in the workshop and in the plant
• Flow rate 16500 l/min without any appreciable pressure drop in the line
• Height 253 mm and length 119 mm for installation planning
• Version according to Richtlinie 2014/34/EU
• Pressure setting range 0.2 - 6 bar as the leading rating of the device
• Connection thread G 1-1/2" for direct installation in the line

Applications

Assembly lines and manual workstations, pneumatic drives, painting and cleaning technology, laboratory supply.

Standards and conformity

The data sheets refer to Richtlinie 2014/34/EU. Further approvals are not documented and are therefore not stated.