Double threaded nipple »value line«, G 1/4, G 3/8, AF 19, - Riegler 115671
-
This Item:
€1.21
-
Double threaded nipple, reducing, Octagonal, R 3, R 2 1/2, AF 92 - Riegler 125688
€49.10
-
Flat seal made of PTFE size 3 - Riegler 119424
€1.05
Double threaded nipple »value line«, G 1/4, G 3/8, AF 19, Operating pressure max. 60 bar, Operating temperature max. 150 °C For air, water, steam, oil, etc.
Technical data
| Max. operating pressure | 60 bar |
|---|---|
| Max. operating temperature | 150 °C |
| Thread 1 | G 1/4 AG |
| Thread 2 | G 3/8 AG |
| L1 | 22,0 mm |
| L2 | 14,0 mm |
| a/f | 19 mm |
| Series | value line |
Standards and origin
- Customs tariff number: 74122000
- Country of origin: IT
About Double nipples
A double threaded nipple joins two female ports and bridges the size step when fitting and connection do not match. Both ends carry a male thread, either in the same size or reduced. Working pressure runs from 20 to 60 bar depending on the version.
What matters when choosing
- Thread 1 and thread 2 decide whether the nipple extends or reduces. Both sides are covered from M5 and G 1/8 up to G 1 1/4, the second side additionally up to R 2.
- The thread form determines how the joint seals. Parallel G threads to DIN EN ISO 228-1 need a separate seal, tapered R threads to ISO 7-1 seal in the thread itself.
- Brass CW614N is the default material. Electroplated nickel-plated brass CW614N suits visible installations and mild humidity, stainless steel 1.4571, 1.4408 and 1.4404 aggressive media.
- Working pressure between 20 and 60 bar depends on material and size. For large threads from G 1 upwards, check the value per article rather than assuming the top figure of the group.
- Maximum operating temperature sits between 150 °C and 200 °C. Where steam or hot oil is carried, that is the deciding criterion alongside pressure.
Typical applications
- Joining two female-threaded fittings in a pipe run without an extra socket
- Stepping down from a larger manifold port to a smaller connecting line
- Mounting gauges, shut-off valves and filters on air preparation units
- Extending a short connection spigot so a wrench can be applied
- Building manifolds for water, oil and neutral gases in workshop and plant construction
The NonPlusUltra versions are made from stainless steel 1.4404 and sealed with FDA-compliant FPM, released for compressed air, neutral gases and liquids, oil and grease. The value line series is also part of the group, which holds 292 articles in total.
| Weight | 0.020000 |
|---|---|
| Manufacturer | Riegler |
| Hersteller-Nr | 252.62-E |
| EAN | 4047322184151 |
| Zolltarifnummer | 74122000 |
| GPSR Herstellerdaten | Riegler & Co. KG, Schützenstraße 27, DE-72574 Bad Urach, www.riegler.de |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Country of Manufacture | Italy |
| Thread | G 1/4 AG |
| Thread 2 | G 3/8 AG |
| Norm | DIN EN ISO 228-1 |
| Series | value line |
| Betriebsdruck max [bar] | 60.000000 |
| Pneumatic connection | G1/4 AG |
| Temperature (max.) | 150 |









