Images are examples, some edited with AI. The technical data are authoritative. AI notice
Double threaded nipple, M3 o., M3 o., AF 5, nickel-plated brass - Riegler 134771
Double threaded nipple, M3 o., M3 o., AF 5, nickel-plated brass
- Specialist dealer since 2009
- Invoice payment for regular customers
- Worldwide shipping
- Technical questions clarified with the manufacturer
Description
Double threaded nipple, M3 o., M3 o., AF 5, nickel-plated brass, Max. working pressure 25 bar, Max. operating temperature 150 °C Suitable for air, water, oil, steam, etc.
Standards and origin
- Customs tariff number: 74122000
- Country of origin: TR
About Double nipples
A double threaded nipple joins two female ports and bridges the size step when fitting and connection do not match. Both ends carry a male thread, either in the same size or reduced. Working pressure runs from 20 to 60 bar depending on the version.
What matters when choosing
- Thread 1 and thread 2 decide whether the nipple extends or reduces. Both sides are covered from M5 and G 1/8 up to G 1 1/4, the second side additionally up to R 2.
- The thread form determines how the joint seals. Parallel G threads to DIN EN ISO 228-1 need a separate seal, tapered R threads to ISO 7-1 seal in the thread itself.
- Brass CW614N is the default material. Electroplated nickel-plated brass CW614N suits visible installations and mild humidity, stainless steel 1.4571, 1.4408 and 1.4404 aggressive media.
- Working pressure between 20 and 60 bar depends on material and size. For large threads from G 1 upwards, check the value per article rather than assuming the top figure of the group.
- Maximum operating temperature sits between 150 °C and 200 °C. Where steam or hot oil is carried, that is the deciding criterion alongside pressure.
Typical applications
- Joining two female-threaded fittings in a pipe run without an extra socket
- Stepping down from a larger manifold port to a smaller connecting line
- Mounting gauges, shut-off valves and filters on air preparation units
- Extending a short connection spigot so a wrench can be applied
- Building manifolds for water, oil and neutral gases in workshop and plant construction
The NonPlusUltra versions are made from stainless steel 1.4404 and sealed with FDA-compliant FPM, released for compressed air, neutral gases and liquids, oil and grease. The value line series is also part of the group, which holds 292 articles in total.
Technical data
| Max. working pressure | 25 bar |
|---|---|
| Max. operating temperature | 150 °C |
| Material | nickel-plated brass CW614N (galvanised nickel-plated) |
| Thread 1 | M3 ET |
| Thread 2 | M3 ET |
| L1 | 9.0 mm |
| L2 | 3.0 mm |
| L3 | 3.0 mm |
| a/f | 5 mm |
| Weight | 0.001000 |
| Manufacturer | Riegler |
| Hersteller-Nr | MSN252M33 |
| EAN | 4047322489171 |
| Zolltarifnummer | 74122000 |
| GPSR Herstellerdaten | Riegler & Co. KG, Schützenstraße 27, DE-72574 Bad Urach, www.riegler.de |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Country of Manufacture | Turkey |
| Material | Nickel-plated brass CW614N (electroplated nickel finish) |
| Thread | M3 AG |
| Thread 2 | M3 AG |
| Working pressure max. [bar] | 25 |
| Norm | DIN EN ISO 228-1 |
| Betriebsdruck max [bar] | 25.000000 |
| Pneumatic connection | M3 AG |
| Temperature (max.) | 150 |
Downloads
ESD version
Questions about this item
Any other question?
Send us the item number and your question. We clarify technical details directly with the manufacturer and usually reply on the next working day. Ask a question





