Double threaded nipple, M5 o., G 1/4 o., AF 17, Brass - Riegler 134480
-
This Item:
€2.74
-
Double threaded nipple, R 1, ET, AF 36, Stainless steel 1.4408 - Riegler 118317
€5.70
-
Double threaded nipple red., R 1/4, R 1/8, ET, AF 15 - Riegler 118528
€2.18
Double threaded nipple, M5 o., G 1/4 o., AF 17, Brass, Max. working pressure 25 bar, Max. operating temperature 150 °C
Technical data
| Max. working pressure | 25 bar |
|---|---|
| Max. operating temperature | 150 °C |
| Material | brass CW614N |
| Thread 1 | M5 ET |
| Thread 2 | G 1/4 ET |
| L1 | 19.0 mm |
| L2 | 5.0 mm |
| L3 | 9.0 mm |
| a/f | 17 mm |
Standards and origin
- Customs tariff number: 74122000
- Country of origin: TR
About Double nipples
A double threaded nipple joins two female ports and bridges the size step when fitting and connection do not match. Both ends carry a male thread, either in the same size or reduced. Working pressure runs from 20 to 60 bar depending on the version.
What matters when choosing
- Thread 1 and thread 2 decide whether the nipple extends or reduces. Both sides are covered from M5 and G 1/8 up to G 1 1/4, the second side additionally up to R 2.
- The thread form determines how the joint seals. Parallel G threads to DIN EN ISO 228-1 need a separate seal, tapered R threads to ISO 7-1 seal in the thread itself.
- Brass CW614N is the default material. Electroplated nickel-plated brass CW614N suits visible installations and mild humidity, stainless steel 1.4571, 1.4408 and 1.4404 aggressive media.
- Working pressure between 20 and 60 bar depends on material and size. For large threads from G 1 upwards, check the value per article rather than assuming the top figure of the group.
- Maximum operating temperature sits between 150 °C and 200 °C. Where steam or hot oil is carried, that is the deciding criterion alongside pressure.
Typical applications
- Joining two female-threaded fittings in a pipe run without an extra socket
- Stepping down from a larger manifold port to a smaller connecting line
- Mounting gauges, shut-off valves and filters on air preparation units
- Extending a short connection spigot so a wrench can be applied
- Building manifolds for water, oil and neutral gases in workshop and plant construction
The NonPlusUltra versions are made from stainless steel 1.4404 and sealed with FDA-compliant FPM, released for compressed air, neutral gases and liquids, oil and grease. The value line series is also part of the group, which holds 292 articles in total.
| Weight | 0.015000 |
|---|---|
| Manufacturer | Riegler |
| Hersteller-Nr | MS252M514 |
| EAN | 4047322487238 |
| Zolltarifnummer | 74122000 |
| GPSR Herstellerdaten | Riegler & Co. KG, Schützenstraße 27, DE-72574 Bad Urach, www.riegler.de |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Country of Manufacture | Turkey |
| Material | Brass CW614N |
| Thread | M5 AG |
| Thread 2 | G 1/4 AG |
| Working pressure max. [bar] | 25 |
| Norm | DIN EN ISO 228-1 |
| Betriebsdruck max [bar] | 25.000000 |
| Pneumatic connection | M5 AG |
| Temperature (max.) | 150 |
-
Double threaded - Riegler K1704As low as €1.78









