Double threaded nipple, G 3/8 a., G 3/8 a. LH, AF 19, brass - Riegler 154199
-
This Item:
€2.96
-
Double threaded - Riegler K1704
As low as €1.78Show details
-
Removable Double threaded nipple, flat sealing - Riegler K2536
As low as €6.46Show details
Double threaded nipple, G 3/8 a., G 3/8 a. LH, AF 19, brass, working pressure max. 60 bar, max. operating temp. 200 °C
Technical data
| Max. working pressure | 60 bar |
|---|---|
| Max. operating temperature | 200 °C |
| Material | brass CW614N |
| Thread 1 | G 3/8 ET |
| Thread 2 | G 3/8 ET left |
| L1 | 23.0 mm |
| L2 | 9.0 mm |
| L3 | 9.0 mm |
| a/f | 19 mm |
Standards and origin
- Customs tariff number: 74122000
- Country of origin: TR
About Double nipples
A double threaded nipple joins two female ports and bridges the size step when fitting and connection do not match. Both ends carry a male thread, either in the same size or reduced. Working pressure runs from 20 to 60 bar depending on the version.
What matters when choosing
- Thread 1 and thread 2 decide whether the nipple extends or reduces. Both sides are covered from M5 and G 1/8 up to G 1 1/4, the second side additionally up to R 2.
- The thread form determines how the joint seals. Parallel G threads to DIN EN ISO 228-1 need a separate seal, tapered R threads to ISO 7-1 seal in the thread itself.
- Brass CW614N is the default material. Electroplated nickel-plated brass CW614N suits visible installations and mild humidity, stainless steel 1.4571, 1.4408 and 1.4404 aggressive media.
- Working pressure between 20 and 60 bar depends on material and size. For large threads from G 1 upwards, check the value per article rather than assuming the top figure of the group.
- Maximum operating temperature sits between 150 °C and 200 °C. Where steam or hot oil is carried, that is the deciding criterion alongside pressure.
Typical applications
- Joining two female-threaded fittings in a pipe run without an extra socket
- Stepping down from a larger manifold port to a smaller connecting line
- Mounting gauges, shut-off valves and filters on air preparation units
- Extending a short connection spigot so a wrench can be applied
- Building manifolds for water, oil and neutral gases in workshop and plant construction
The NonPlusUltra versions are made from stainless steel 1.4404 and sealed with FDA-compliant FPM, released for compressed air, neutral gases and liquids, oil and grease. The value line series is also part of the group, which holds 292 articles in total.
| Weight | 0.027000 |
|---|---|
| Manufacturer | Riegler |
| Hersteller-Nr | DGN.38.38LH |
| EAN | 4047322823371 |
| Zolltarifnummer | 74122000 |
| GPSR Herstellerdaten | Riegler & Co. KG, Schützenstraße 27, DE-72574 Bad Urach, www.riegler.de |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Country of Manufacture | Turkey |
| Material | Brass CW614N |
| Thread | G 3/8 AG |
| Thread 2 | G 3/8 AG links |
| Working pressure max. [bar] | 60 |
| Norm | DIN EN ISO 228-1 |
| Betriebsdruck max [bar] | 60.000000 |
| Pneumatic connection | G3/8 AG |
| Temperature (max.) | 200 |







