Flat-face male coupling with pressure eliminator, G 1/2", size 2, 400 bar, zinc-plated steel

Pressure trapped in a disconnected size 2 component with a G 1/2" female thread often blocks the last turn of a coupling. This male half releases it while connecting and then works at 400 bar.

Advantages

• The design is fully compatible with standard flat-face couplings.
• Zinc-plated steel with an NBR seal covers a temperature range of -30 to +100 °C.
• Working pressure of 400 bar at a nominal bore of 10 mm in size 2.
• The flat coupling face can be wiped clean before connecting, so no dirt enters the hydraulic system.
• Connection dimension A measures 19.7 mm with a G 1/2" female thread.

Technical data

Applications

The intended use covers hydraulic hose lines that are disconnected and rejoined in service. A working pressure of 400 bar and a temperature range of -30 to +100 °C set the limits.

Standards and compatibility

The version with pressure eliminator is fully compatible with standard flat-face couplings of size 2 with a nominal bore of 10 mm.