Double threaded nipple red., G 1/4, ET, 1/8, AF 15 - Riegler 119197
-
This Item:
€2.21 €1.86
-
Flat seal made of PTFE size 6 - Riegler 119491
€2.12 €1.78
-
Double threaded nipple red., G 2, G 1 1/2, ET, AF 61 - Riegler 119311
€17.26 €14.50
Double threaded nipple reducing, G 1/4, G 1/8, ET, AF 15, Working pressure max. 20 bar, Stainless steel 1.4408
Technical data
| Max. working pressure | 20 bar |
|---|---|
| Thread 1 | G 1/4 ET |
| Thread 2 | G 1/8 ET |
| L1 | 22.5 mm |
| a/f | 15 mm |
Standards and origin
- Standard thread: DIN EN ISO 228-1
- Customs tariff number: 73072910
- Country of origin: CN
About Double nipples
A double threaded nipple joins two female ports and bridges the size step when fitting and connection do not match. Both ends carry a male thread, either in the same size or reduced. Working pressure runs from 20 to 60 bar depending on the version.
What matters when choosing
- Thread 1 and thread 2 decide whether the nipple extends or reduces. Both sides are covered from M5 and G 1/8 up to G 1 1/4, the second side additionally up to R 2.
- The thread form determines how the joint seals. Parallel G threads to DIN EN ISO 228-1 need a separate seal, tapered R threads to ISO 7-1 seal in the thread itself.
- Brass CW614N is the default material. Electroplated nickel-plated brass CW614N suits visible installations and mild humidity, stainless steel 1.4571, 1.4408 and 1.4404 aggressive media.
- Working pressure between 20 and 60 bar depends on material and size. For large threads from G 1 upwards, check the value per article rather than assuming the top figure of the group.
- Maximum operating temperature sits between 150 °C and 200 °C. Where steam or hot oil is carried, that is the deciding criterion alongside pressure.
Typical applications
- Joining two female-threaded fittings in a pipe run without an extra socket
- Stepping down from a larger manifold port to a smaller connecting line
- Mounting gauges, shut-off valves and filters on air preparation units
- Extending a short connection spigot so a wrench can be applied
- Building manifolds for water, oil and neutral gases in workshop and plant construction
The NonPlusUltra versions are made from stainless steel 1.4404 and sealed with FDA-compliant FPM, released for compressed air, neutral gases and liquids, oil and grease. The value line series is also part of the group, which holds 292 articles in total.
| Norm | DIN EN ISO 228-1 |
|---|---|
| Hersteller-Nr | DGNG1418ES4408RED |
| Manufacturer | Riegler |
| Country of Manufacture | China |
| EAN | 4047322724821 |
| Weight | 0.011000 |
| Zolltarifnummer | 73072910 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikel-Authentizität | Original product |
| Artikelzustand | New |
| Betriebsdruck max [bar] | 20.000000 |
| Pneumatic connection | G1/4 AG |
| Thread | G 1/4 AG |
| Thread 2 | G 1/8 AG |
| Working pressure max. [bar] | 20 |
| Thread standard | DIN EN ISO 228-1 |
| Position sensing | No |






