Plastic pipe, PA 12, blue, hose Ø 22x18, roller length 100 m - Riegler 114014
-
This Item:
€820.81 €689.76
-
Straight screw-in fitting PP, G 1 1/2 o., for hose exterior Ø 32 - Riegler 110277
€19.67 €16.53
-
Air distributor socket, Aluminium, Input G 1/2, Output 3x G 1/2 - Riegler 114027
€30.83 €25.91
Plastic pipe, PA 12, blue, operating temperature -60 °C to 100 °C, working pressure -0.95 to 14 bar, hose Ø 22x18, length 100 m Resistant to corrosion, vibration, impact, ageing, high pressures and heat.
Technical data
| Min. operating temperature | -60 °C |
|---|---|
| Max. operating temperature | 100 °C |
| Min. working pressure | -0.95 bar |
| Max. working pressure | 14 bar |
| Material | PA 12, hard (acc. to DIN 73378) |
| Series | speedfit and sharkbite |
| Tube I.D. | 18 mm |
| Tube O.D. | 22 mm |
| Reel length | 100 m |
| Min. bending radius | 100 mm |
Standards and origin
- Customs tariff number: 39173200
- Country of origin: DE
About Pipes and coils
Tubing and coil stock form the fixed distribution level between the compressor and the consumer, with connectors only at the ends. Outside diameters run from 4 to 54 mm and permitted working pressures from 6 to 38 bar, reaching down to -0.95 bar under vacuum. Delivery is either on coils or as straight lengths.
What matters when choosing
- Material comes first. Hard PA 12 to DIN 73378 suits control and machine lines, LLDPE and LDPE are supplied as coil stock, and surface-coated aluminium is used for fixed distribution piping.
- Tube outside diameter from 4 to 54 mm has to match the push-in connector. The speedfit and sharkbite series are dimensioned for it.
- Maximum working pressure lies between 6 and 38 bar depending on material and wall thickness. Use the figure of the actual tube rather than the top value of the group.
- Operating temperature reaches down to -60 °C on the cold-rated versions and up to 65 °C or 100 °C at the upper end.
- Delivery form and installation belong together. Coil length, tube length and the minimum bending radius decide how many bends and connectors a run needs.
Typical applications
- Compressed air ring mains in workshops and production halls.
- Machine and cylinder plumbing with PA 12.
- Cold water and drinking water lines in LLDPE or LDPE.
- Drop lines to service units and take-off points.
- Vacuum lines down to -0.95 bar.
LLDPE and LDPE tubing carries approvals to DVGW worksheet W270, KTW, NSF and WRAS and is suitable for cold water with a chlorine content of up to 4 ppm. Aluminium tubing is corrosion-resistant and electrically insulating, and the 46 articles in this group come from Germany, the United Kingdom, Italy and Turkey.
| Norm | DIN 73378 |
|---|---|
| Hersteller-Nr | 94.22-100 |
| Manufacturer | Riegler |
| Country of Manufacture | Germany |
| EAN | 4047322220460 |
| Weight | 13.580000 |
| Zolltarifnummer | 39173200 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikel-Authentizität | Original product |
| Artikelzustand | New |
| Temperature (max.) | 100 |
| Material | PA 12, rigid (to DIN 73378) |
| Betriebsdruck max [bar] | 14.000000 |
| Series | speedfit und sharkbite |
| Tube OD [mm] | 22 |
| Working pressure max. [bar] | 14 |
| Position sensing | No |









