2/2-way toggle lever valve, both sides, Quick connector, G 1/8 - Riegler 107011

2/2-way toggle lever valve, both sides, Quick connector for hose 6/4, G 1/8, PN max. 8 bar, Temperature -20 °C to 80 °C Manually operated toggle valve, 2/2-way types. For all applications where compressed air must be switched on or off quickly and easily or a cylinder operated manually. Designed as a banjo-type valve with a hollow bolt and ring piece. Suitable for screwing directly into the equipment or for panel mounting. Compact type of construction, also ideal where space is restricted.

Technical data

Standards and origin

• Customs tariff number: 74122000
• Country of origin: IT

About Toggle valves

Toggle lever valves switch compressed air by hand, right at the cylinder or the fixture. They work from 0 to 8 bar and the group covers 29 items in 2/2-way and 3/2-way versions. The banjo bolt design with ring piece lets the valve be screwed straight into the actuator, so no extra manifold block is needed.

What matters when choosing

• 2/2-way or 3/2-way function: the 2/2 version only turns the air on and off, the 3/2 version also exhausts the outlet side, which is what single-acting cylinders need.
• Thread G 1/8 male or G 1/4 male on the screw-in stud, with Thread 2 as G 1/8 female or G 1/4 female on the both-sided versions. The port on the actuator decides.
• Type of connection: threaded port, quick connector or push-in fitting. The quick connector saves assembly time, a threaded port stays the choice where lines are already made up.
• Hose side sizes run 4, 5/3, 6, 6/4, 8, 8/6, 10 and 10/8, plus G 1/8 female and G 1/4 female. The size has to match the installed tubing or the joint will not hold pressure.
• Max. operating pressure of 8 bar and filtered, lubricated compressed air as the medium. Both set the limits, and unfiltered or dry air shortens the life of the NBR seals.

Typical applications

• Manual control of single-acting cylinders on clamping and holding fixtures
• Switching blow-off and air-jet points on and off
• Isolating a single consumer for maintenance without shutting down the main line
• Panel-mounted control points using the panel thread provided
• Simple hand controls at assembly and test benches

Sealing is by NBR and the released medium is filtered, lubricated compressed air. Every valve in this group is made in Italy.