Pressure gauge, robust design, G 1/2, -1 / 0 bar, Ø 100 - Riegler 102016

Pressure gauge, robust design, Connection radial bottom, G 1/2, Goods class 1.0, Measurement range -1 / 0 bar, Ø 100 Robust bourdon-tube pressure gauge. Suitable for gaseous or liquid media which do not corrode copper alloy, do not have high viscosity and do not crystallise.

Technical data

Standards and origin

• Customs tariff number: 90262040
• Country of origin: PL

About Pressure gauges robust type

Bourdon tube pressure gauges of this heavy-duty design show operating pressure directly at the machine, with no power supply and no wiring. The series covers measuring ranges from 0 to 600 bar and connects via a G 1/2 male thread. A CrNi steel 1.4301 case keeps the instrument serviceable in wet and dirty surroundings.

What matters when choosing

• Measuring range max. bar: selectable from 0 to 600 bar. Pick a full scale value that puts normal operating pressure in the middle third of the dial, which protects both reading accuracy and the Bourdon tube.
• Diameter: the group spans 100 to 160 mm. The larger dial pays off when the gauge is read from several metres away, the smaller one saves space on panels and manifolds.
• Thread: all 52 items use G 1/2 male. Check the mating port in the line, otherwise plan for an adapter.
• Medium temperature: rated from -40 °C to 80 °C. Hotter media call for a siphon or a cooling section ahead of the gauge.
• Case: CrNi steel 1.4301 throughout, so washdown areas and outdoor installation are covered.

Typical applications

• Compressed air networks and compressor rooms where line pressure has to stay readable on site
• Hydraulic power units and test benches operating well into three-digit bar figures
• Pump and filter stations for checking inlet and outlet pressure
• Cooling and process water circuits with gaseous or liquid, non-crystallising media
• Maintenance and service points where a local indication complements electronic sensors

All 52 items in this group use a CrNi steel 1.4301 case and are manufactured in Poland. They suit gaseous and liquid media that are neither highly viscous nor crystallising and that do not attack copper alloys.