Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
Takes over the overpressure protection on systems with a G 3/4" connection and nominal size DN 10. Set pressure 35.00 bar, discharge capacity 1466.2 m³/h, body made of stainless steel 1.4401. Type-approved, factory set and lead-sealed.
Safety valve, preset and lead-sealed, G 3/4", DN 10, 35.00 bar, stainless steel 1.4401
FLUIDICS EQUIPMENT
Original product
Net price (excl. VAT)
€210.69
Item
FL-290557
Manufacturer no.
SV 34 10-35 ES2A
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.SV 34 10-35 ES2A
EAN4050571667009
Customs tariff number84814010
ConditionNew
Artikel
FL-290557
Frequently Bought Together
-
This Item:
€210.69
-
Safety valve, preset and lead-sealed, G 3/8", DN 10, 3.20 bar, brass
€34.85
-
Safety valve, preset and lead-sealed, G 3/4", DN 10, 9.80 bar, brass
€34.85
Total price
The set pressure is factory adjusted to 35.00 bar and lead-sealed, so the value cannot be changed unnoticed. When the system reaches this pressure, the valve discharges up to 1466.2 m³/h. The stainless steel 1.4401 body carries the G 3/4" connection thread for nominal size DN 10.
Benefits
- Screwed in through G 3/4" in DN 10 and tightened at the 32 mm wrench flat.
- Type approval documented by the marking TÜV.SV...-882.10.D/G.0.71 CE0036 35 bar.
- Overall height H of 95 mm and height h of 16 mm, so the space required is known before installation.
- The set value of 35.00 bar stays traceable and unchanged thanks to the lead seal.
- Discharge capacity of 1466.2 m³/h, referred to the set pressure of 35.00 bar.
Technical data
| Property | Value |
|---|---|
| Type | Safety valve, spring-loaded, free discharge |
| Nominal size | DN 10 |
| Thread | G 3/4" |
| Set pressure | 35.00 bar |
| Discharge capacity | 1466.2 m³/h |
| Body material | stainless steel 1.4401 |
| Seal material | FKM |
| Temperature range | -25 to +180 °C |
| Media | Compressed air and other non-toxic, non-flammable gases |
| Overall height H | 95 mm |
| Height h | 16 mm |
| Spanner size SW | 32 mm |
| Setting | factory set and lead-sealed |
| Component identification | TÜV.SV...-882.10.D/G.0.71 CE0036 35 bar |
Applications
- Protection of compressed air receivers with a permissible working pressure of 35.00 bar.
- Protection of pipes and fittings in compressed air networks with a G 3/4" connection.
- Use on compressors and air treatment units where up to 1466.2 m³/h have to be discharged.
Standards and conformity
The delivery is based on the type approval, documented by the marking TÜV.SV...-882.10.D/G.0.71 CE0036 35 bar with the notified body CE0036. The set pressure of 35.00 bar is adjusted and sealed at the factory, adjustment on site is not intended. Fixed settings between 0.2 and 50 bar are possible. On request the valve comes with an NPT thread and with a setting certificate.
| Hersteller-Nr | SV 34 10-35 ES2A |
|---|---|
| Manufacturer | Fluidics equipment |
| EAN | 4050571667009 |
| Zolltarifnummer | 84814010 |
| GPSR Herstellerdaten | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Artikel-Authentizität | Original product |
| Artikelzustand | New |
| Abblasleistung [m³/h] | 1466,2 |
| Material | 1.4401 |
| Thread | G 3/4 |
| Set pressure [bar] | 35,00 |
Customers Who Bought This Item Also Bought
