Pressure regulator, G 3/4", 0.2 - 6 bar, aluminium, inlet pressure max. 40 bar

Anyone who wants to supply a machine with a constant pressure sets it on this pressure regulator. The pressure setting range extends over 0.2 - 6 bar. The body is made of aluminium. The device is screwed in with G 3/4". The inlet pressure amounts to at most 40 bar.

Benefits

• Temperature range -10 to +60 °C for use in the workshop and in the plant
• Flow rate 15000 l/min without any appreciable pressure drop in the line
• Height 177 mm and length 117 mm for installation planning
• Pressure setting range 0.2 - 6 bar as the leading rating of the device
• Connection thread G 3/4" for direct installation in the line
• Inlet pressure at most 40 bar, so the load limit is clearly stated

Technical data

Applications

Assembly lines and manual workstations, pneumatic drives, painting and cleaning technology, laboratory supply.

Standards and conformity

The data sheets refer to Richtlinie 2014/34/EU. Further approvals are not documented and are therefore not stated.