Pressure regulator, G 3/4", 0.2 - 6 bar, zinc die casting Z410, inlet pressure max. 25 bar, 90

The pressure regulator keeps the working pressure downstream constant even when the inlet pressure fluctuates. The pressure setting range covers 0.2 - 6 bar. The connection is made via thread G 3/4". The material used is zinc die casting Z410. The inlet pressure amounts to at most 25 bar.

Benefits

• Pressure setting range 0.2 - 6 bar as the leading rating of the device
• Connection thread G 3/4" for direct installation in the line
• Inlet pressure at most 25 bar, so the load limit is clearly stated
• Temperature range -10 to +60 °C for use in the workshop and in the plant
• Flow rate 5000 l/min without any appreciable pressure drop in the line
• Height 163 mm and length 90 mm for installation planning

Technical data

Applications

Plant construction with fluctuating line pressure, packaging machines, conveying technology and maintenance.

Standards and conformity

The data sheets refer to Richtlinie 2014/34/EU. Further approvals are not documented and are therefore not stated.