Directional Spool Valve 4WEH16J7X/6EG48N9ETS2DK6L/B08 - Bosch Rexroth R900777239

Instead of two separate connectors this valve carries one 7-pole connector (6 + PE) taking both solenoids and the protective earth. That cuts the number of cables at the control block. Supply is 48 VDC and the spool with symbol J works in three switching positions at up to 300 l/min and a maximum of 280 bar.

Benefits

• 7-pole connector (6 + PE) serving both solenoids through one lead
• Supply voltage of 48 VDC for battery and extra-low voltage installations
• Spool symbol J with three switching positions on four ports
• Internal pilot oil supply and internal pilot oil return
• Flow up to 300 l/min at a maximum of 280 bar in size 16
• Mass 10 kg, subplate mounting to ISO 4401-07-07-0-05, NBR for HL fluid

Technical data

Application

In densely populated control blocks every lead saved counts, because room for cable routing runs out quickly. The 7-pole connector gathers both solenoids and keeps the wiring readable. The 48 VDC supply has to be accounted for when laying out the control circuit.

Manufacturer

Bosch Rexroth lists this pilot-operated directional valve 4WEH16J7X/6EG48N9ETS2DK6L/B08 under material number R900777239. Data sheets RE 24751 and RE 07600-B carry the characteristic curves, the installation dimensions and the interface data. Pin assignment of the seven poles is stated in the data sheet and cannot be chosen freely.