Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
A ready-to-connect set of 5 m Type B WLD sensing cable and a 2 m AB connecting cable, 7 m in total. The thin Type B cable dries faster than Type A after an alarm and plugs straight into a WLD zone input with green terminal block. A good match for single racks, cooling units or the area around a CDU.
WLD sensing cable Type B set 2+5 m, 5 m sensing cable with 2 m connecting cable AB, ready to connect - HW group 600919
HW GROUP
Original product
Net price (excl. VAT)
€228.90
Item
HWG-600919
Manufacturer no.
600919
Personal expert advice
Brand new
Specialist dealer since 2009
Original product
Worldwide shipping
Product data
Manufacturer no.600919
Country of originCzechia
Customs tariff number90269000
ConditionNew
Artikel
HWG-600919
Frequently Bought Together
A spot sensor rarely covers the area around a cooling unit or CDU, because water can escape at any point. This set monitors 5 m of sensing cable and connects to a WLD zone input via the 2 m AB connecting cable. According to the manufacturer, the system goes from first drops to alarm in 1-5 minutes.
Benefits
- Detection along the full length: a few drops of conductive liquid anywhere on the 5 m sensing section trigger an alarm.
- Thinner than Type A: the smaller diameter dries faster, and the cable can be cleaned, dried and reused.
- Tolerant installation: no bend radius and no twist limit, stepping on or pressing the cable causes no false alarm, and it can run under door thresholds.
- Mix with Type A: both types share the same 2-pin locking connector and can be combined in one zone.
- Extendable: non-sensing extension cables allow up to 185 m per zone.
Technical data
| Measured variable | Leakage of conductive liquids, resistive principle |
|---|---|
| Range | 0-1 (leak yes/no) |
| Cable type | WLD sensing cable Type B |
| Sensing cable length | 5 m |
| Connecting cable | WLD connecting cable AB, 2 m, green terminal block |
| Total length | 7 m |
| Connector | 2-pin, locking |
| Max. zone length | 185 m |
| System reaction time | 1-5 minutes from first drops to alarm |
| Galvanic isolation | No |
| Operating conditions | 0 to +60 °C, 0-100 % RH |
| Storage conditions | -30 to +60 °C, 5-95 % RH |
| Installation | Floor, wall |
| Warranty | 24 months |
| Manufacturer part number | 600919 |
Applications
- Server rooms and IT racks, around cooling units and cable trays
- Liquid cooling with CDUs and quick disconnects
- Air conditioning, chillers and condensate lines
- Boiler rooms around boilers, pumps and valves
- Hotel bathrooms and corridors
Scope of delivery
- 1 x WLD sensing cable Type B, 5 m
- 1 x WLD connecting cable AB, 2 m, with green terminal block
Compatibility
- Any HW group device with a WLD zone input (green terminal block)
- Can be combined with WLD sensing cable Type A in the same zone
- Extendable with Type B sensing cable without connecting cable, e.g. 600912 and 600913
| Weight | 0.073000 |
|---|---|
| Manufacturer | HW group |
| Hersteller-Nr | 600919 |
| Zolltarifnummer | 90269000 |
| GPSR Herstellerdaten | HW group s.r.o., Rumunská 26, CZ-120 00 Praha 2, www.hw-group.com |
| Artikelzustand | New |
| Artikel-Authentizität | Original product |
| Country of Manufacture | Czechia |
| Warranty | 2 years |
Accessories from our range
Customers Who Bought This Item Also Bought
Complementary products
Check items to add to the cart or
