Water flood detector 1W-UNI 3m, spot detection with 4 contact pins, IP67, 3 m cable, RJ11 - HW group 600579

A single detector at the lowest point is often enough to catch flooding early. The Flood detector 1W-UNI 3m senses conductive liquid through four contact pins, reports 1 or 0 to the monitoring unit and needs no external power, drawing only 10 mA from the bus.

Benefits

• No power adapter: supplied with 5 V directly from the 1-Wire UNI port.
• Clear signal: value 1 for flooded, 0 for dry, ready for alarm rules.
• Sealed: IP67 rated, the detector may sit below the liquid surface.
• Flexible mounting: lies on an insulating floor or fixes to wall or floor through the centre hole.
• Compact: 47 x 37 x 22 mm and 71 g.

Applications

• Raised floors in server rooms and data centres
• Under air conditioning units, CDUs and coolant lines of liquid cooling systems
• Plant rooms, pump sumps and basements

Compatibility

• Designed by the manufacturer for Poseidon2, Ares and STE2 with an RJ11 port for 1-Wire UNI sensors
• Several sensors can be connected through the T-Box hub with 5 RJ11 ports
• For area coverage with sensing cable the manufacturer recommends the WLD system