WLD sensing cable Type B set 2+2 m, 2 m sensing cable with 2 m connecting cable AB, ready to connect - HW group 600918

When an A/C unit or coolant manifold starts to drip, every minute counts. This set of 2 m Type B sensing cable and 2 m AB connecting cable works as soon as it is wired to a WLD zone input. According to the manufacturer, the system goes from first drops to alarm in 1-5 minutes.

Benefits

• Detection along the full length: a few drops of conductive liquid anywhere on the 2 m sensing section trigger an alarm.
• Thinner than Type A: the smaller diameter dries faster, and the cable can be cleaned, dried and reused.
• Tolerant installation: no bend radius and no twist limit, stepping on or pressing the cable causes no false alarm, and it can run under door thresholds.
• Mix with Type A: both types share the same 2-pin locking connector and can be combined in one zone.
• Extendable: non-sensing extension cables allow up to 185 m per zone.

Applications

• Single risk spots in server rooms, e.g. under A/C units or along cable trays
• Liquid cooling with CDUs and quick disconnects
• Air conditioning, chillers and condensate lines
• Boiler rooms around boilers, pumps and valves

Compatibility

• Any HW group device with a WLD zone input (green terminal block)
• Can be combined with WLD sensing cable Type A in the same zone
• Extendable with Type B sensing cable without connecting cable, e.g. 600912 and 600913