WLD sensing cable Type A 2 m with connecting cable AB 2 m, total length 4 m, for leak detection - HW group 600417

Spots like a drip tray, an air-conditioning unit or a coolant manifold only need a short zone. This package covers it completely with 2 m of sensing cable and 2 m of connecting cable, and raises an alarm at the first few drops of water or glycol.

Benefits

• Ready to install: sensing cable plus connecting cable with green terminal block and terminator in one package, 4 m total length.
• Detection along the full length: a few drops of water, ethylene glycol or other conductive liquid trigger the alarm.
• Easy to lay without special training: no bend radius, twist or point pressure limits.
• No false alarms from micro movements of nearby cables, and a disconnected cable is reported as a fault.
• Reusable: after contact with water, clean it, dry it and use it again.
• Expandable with further sensing cable and non-sensing extension cable up to 185 m per zone (60 m on NB-WLD).

Applications

• Data centers and server rooms under raised floors
• Liquid cooling with CDUs and quick disconnects, below manifolds and coupling points
• Drip trays and air-conditioning outlets
• Storage rooms, plant rooms and timber structures

Compatibility

• WLD2, NB-WLD, SD-WLD, Sensor WLD Relay 1W-UNI and Perseus
• J-clips for sensing cable Type A, pack of 10: HW group 600492
• Extending a zone with sensing cable A without connecting cable: HW group 600418, 600465, 600466
• Longer packages with connecting cable: HW group 600467 (2+10 m), 600468 (2+50 m)